Hur snabbt kan certifierings-PDF:er tillhandahållas för en offert?

Within 24 hours, usually faster. Send a WhatsApp message or email specifying the certifications needed and the project name. An engineer compiles the PDF package — files are named by certification type and come without watermarks or sample stamps.

Kvalitetskontroll och certifieringar Tangxiawis industrizon, Guangming, Shenzhen

CERTIFIERAD FÖR
YOUR MARKET.

Q: Which series carry CB certification?

Square 1000 and Square 960. Both outdoor fixed series are tested to IEC 62368-1 under the IECEE CB Scheme. A CB test report is accepted for national certification across member countries, so one round of safety testing covers multiple territories.

Q: What exactly does Matrix 500 hold?

CE, EMC and a TÜV tensile test report. The TÜV report covers the cabinet's load-bearing hardware — rigging points and connections — with measured failure loads rather than a nominal rating, which is what a venue's structural engineer needs for a flown hang.

Q: Which series carry CE, EMC and RoHS?

Our CE and EMC coverage runs to seven series: COB Pro, Block, Brick, Square 1000, Square 960, LED Film and Matrix 500. RoHS is held on six of them — COB Pro, Block, Brick, Square 1000, Square 960 and LED Film — and LED Film also carries a full LVD test report.

Q: Can you arrange certification testing for a project?

Yes. Where a project or destination market requires testing beyond the ready documents, DOIT VISION arranges it against the frozen configuration — CE and EMC for creative and custom builds (circular, sphere, cube, ring, cylinder or bespoke geometry), and accredited NRTL testing for North American projects that require a safety listing, typically 8–10 weeks after layout lock.

CE EMC RoHS CB TÜV

Certification where your project needs it. CE, EMC and RoHS across our fine pitch, indoor, outdoor, transparent and rental lines — plus CB on Square 1000 and Square 960, and a TÜV tensile test report on Matrix 500. Send us your series and destination, and the certificate pack comes back within 24 hours.

Begär certifieringspaket Få en offert

Certified Series

Series with CB

3^Etapp

QC-process

24^h

Dokumentsvar

CE · EMC · RoHS · CB-certifierad

48–72 timmars åldring på varje panel

15 anställda ingenjörer

55+ länder betjänas

For Your Bid Package

Din offertförfrågan kräver bevis. Vi gör det ett WhatsApp-meddelande bort.

Assembling a compliance section for a commercial AV bid is usually the slowest part of the package. You need the documents, you need them in a form procurement accepts, and you need them from a supplier who doesn’t route you through three departments for two weeks.

Certificates matched to the exact series you specify.CE, EMC and RoHS across seven lines; CB on Square 1000 and Square 960; a TÜV tensile test report on Matrix 500. When you need the PDFs for your submission, we send them within 24 hours.

Scoped, not blanket.

Most factories run one long logo strip and let you assume it covers everything. We name the series next to each mark, so the certificate in your submission matches the product on the drawing — first time, no follow-up email.

Formaterad för anbudsinlämning.

PDFs named by certification type, so the file you need is the file you open. No watermarks, no “sample” stamps, no “contact us for the real one” — when you request them, you get the actual documents.

24-timmars dokumentsvar.

Send a WhatsApp message with your project name and the certifications you need. An engineer — not a chatbot — replies with the PDF package, typically within hours, always within a day.

Inget sekretessavtal krävs

Certifieringar är offentliga dokument som bekräftar efterlevnaden. Du borde inte behöva skriva under ett sekretessavtal för att se dem – och hos oss behöver du inte det.

Specifikationer

Matched to the series in your specification.

CE, EMC and RoHS on COB Pro, Block, Brick, Square 1000, Square 960 and LED Film. CE and EMC on Matrix 500, with a TÜV tensile test report for rigging sign-off. CB on Square 1000 and Square 960.

CE — EU Conformity (EMC Directive 2014/30/EU)

EU-marknaden Tullklarering

Seven series are CE-marked. CE conformity under the EMC Directive (2014/30/EU) is what EU customs checks at the border, and it is the first document a European procurement team asks for. It applies to COB Pro, Block, Brick, Square 1000, Square 960, LED Film and Matrix 500.

Scope: COB Pro · Block · Brick · Square 1000 · Square 960 · LED Film · Matrix 500

Användning av offertförfråganEU-installationer, tulldokumentation, offentliga upphandlingar

EMC

EMC — Electromagnetic Compatibility Test Reports

EU + Globalt Labbtestrapporter

The lab evidence behind the CE mark. All seven series are tested for emissions and immunity — the wall must not interfere with other equipment, and must keep running in a room full of radios, dimmers and switchers. LED Film goes further with a full Lvd (Low Voltage Directive) test report alongside its EMC report. The test report is the document your client’s compliance team actually reads, and we send it alongside the certificate.

Scope: COB Pro · Block · Brick · Square 1000 · Square 960 · LED Film · Matrix 500

Användning av offertförfråganEU submissions, broadcast and studio rooms, venues with dense RF

RoHS

RoHS — Begränsning av farliga ämnen

EU + Globalt Materialöverensstämmelse

Six series ship with RoHS documentation. Directive 2011/65/EU restricts lead, mercury, cadmium, hexavalent chromium, PBBs and PBDEs. We hold it for COB Pro, Block, Brick, Square 1000, Square 960 and LED Film, and maintain supplier declarations for every component batch — LED chips, solder, PCB substrates, plastics.

Scope: COB Pro · Block · Brick · Square 1000 · Square 960 · LED Film

Användning av offertförfråganEU, Middle East, Asia-Pacific tenders — near-universal compliance requirement

CB — IECEE CB Scheme (IEC 62368-1) · Square 1000 / Square 960

50+ länder IEC 62368-1

Square 1000 and Square 960 are CB-certified. Under the IECEE CB Scheme both outdoor series are tested to IEC 62368-1, the international safety standard for audio/video and ICT equipment. A CB test report is accepted for national certification across member countries, so you are not repeating safety testing in every territory you ship to.

Scope: Square 1000 · Square 960

Användning av offertförfråganMulti-country deployments, MENA, APAC — one report covers multiple national checks

TÜV

TÜV Tensile Test Report · Matrix 500

Riggningssäkerhet Matrix 500

The document rental customers ask for and rarely get. A TÜV tensile (pull) test report on the Matrix 500 cabinet hardware — the rigging points and load-bearing connections — with measured failure loads rather than a nominal rating. For touring and flown installations, this is what lets a venue’s structural engineer sign off on the hang, and it is why Matrix 500 is the series we recommend for flown work.

Scope: Matrix 500 (indoor and outdoor)

Användning av offertförfråganFlown rigging, touring, venue structural sign-off

Certification by Series

Find your series. That is your certificate list.

Match the series on your drawing to the certification it ships with — the list you paste straight into a bid.

DOIT VISION product certification by series
Serier	Product certification held
COB Pro	CE · EMC · RoHS
Blockera	CE · EMC · RoHS
Tegel	CE · EMC · RoHS
Square 1000	CE · EMC · RoHS · CB
Square 960	CE · EMC · RoHS · CB
LED-film	CE · EMC · RoHS
Matrix / Matrix 500	CE · EMC · TÜV tensile test report

For creative and custom builds we can arrange CE and EMC testing when a project requires it — the testing cost is carried by the customer. Ask at RFQ stage and we build the testing window into the schedule.

Certification + Quality Control

A certificate proves compliance. QC proves consistency.

Port ett

IQC

Kvalitetskontroll för inkommande komponenter. Varje komponentbatch – LED-chip, drivkretskort, kretskort, nätaggregat – genomgår inspektion innan den går in i monteringslinjen. LED-behållarnas konsistens kontrolleras. IC-chip testas på stickprov. Batch som misslyckas? Returneras, inte förhandlas.

Port två

IPQC

In-Process Quality Control. Every 2 hours during production, the QC engineer pulls samples. LED alignment under microscope. Solder joint verification. Colour consistency measured with a spectrometer. A sample failure pauses the line until the root cause is identified.

Port tre

OQC

Outgoing Quality Control. Per-panel pixel test on every unit — not batch sampling. Calibrated camera array detects dead pixels, flicker and colour shift. Brightness uniformity mapped across the full surface. A single dead pixel in the central zone triggers rework.

These three gates are part of an 8-step production process. Each step has an owner, a quality checkpoint, and a handoff.

Se hela produktionsprocessen

Verify It Yourself

Check the work behind every shipment.

Do not take our word for it.Two ways to confirm the quality behind your order — the documentation pack that travels with the shipment, and a live look at the factory whenever you want one.

Metod ett

Request the QC pack for your order.

Every shipment includes a QC documentation pack — IQC batch inspection report, IPQC sampling log, aging test data (temperature and current draw per panel), and OQC pixel test results. You don’t have to ask for it; it’s in the crate. If you want a preview before ordering, request a pack from a recent shipment.

Metod två

Video call us and watch QC happen.

Open WhatsApp, start a video call. An engineer points the camera at the aging racks with panels running burn-in cycles, then the QC station with the pixel-test camera array, then the packing area with crates being assembled. Fifteen minutes, zero staging. If a factory won’t let you do this, ask yourself why.

Starta en livevideoverifiering

Vanliga frågor

Vad upphandlingsteam frågar om våra certifieringar.

Our LED displays carry CE and EMC on seven series — COB Pro, Block, Brick, Square 1000, Square 960, LED Film and Matrix 500. RoHS on six of those. Square 1000 and Square 960 add CB (IECEE, IEC 62368-1). Matrix 500 adds a TÜV tensile test report covering its rigging hardware. Send us the series and the destination market and the document pack comes back within 24 hours.

Square 1000 and Square 960. Both outdoor fixed series are tested to IEC 62368-1 under the IECEE CB Scheme. A CB test report is accepted for national certification across member countries, which means one round of safety testing covers multiple territories you ship to.

CE, EMC and a TÜV tensile test report. The TÜV report covers the cabinet’s load-bearing hardware — rigging points and connections — with measured failure loads rather than a nominal rating, which is what a venue’s structural engineer needs for a flown hang. If your project also needs RoHS documentation on the rental line, tell us at RFQ stage and we will map the testing route.

Our CE and EMC coverage runs to seven series: COB Pro, Block, Brick, Square 1000, Square 960, LED Film and Matrix 500. RoHS is held on six of them — COB Pro, Block, Brick, Square 1000, Square 960 and LED Film, and LED Film also carries a full Lvd test report. Send us the series and the destination market and we will confirm the document pack for that combination before you write it into the bid.

Yes. Where a project or a destination market requires testing beyond our ready documents, we arrange it against the frozen configuration — CE and EMC for creative and custom builds (circular, sphere, cube, ring, cylinder or bespoke geometry), and accredited NRTL testing for North American projects that require a safety listing, typically 8–10 weeks after layout lock. Our 15-person engineering team handles documentation, sample preparation and lab coordination.

Inom 24 timmar — usually faster. Send a WhatsApp message or email with the certifications you need and your project name. An engineer, not an automated system, compiles the PDF package. Files are named by certification type and come without watermarks or “sample” stamps.

DOIT VISION Ingenjörsteam

Certifiering och efterlevnad

Reviewed and maintained by the DOIT VISION engineering team. 19 years of LED display engineering across 55+ countries. This page last reviewed September 2026. Certification scope and series coverage re-verified with the factory on 21 September 2026.

Tillverkare: DOIT VISION
Grundad: 2013, Shenzhen, Kina
Anläggningens läge: Jingting Building, 1110 Huaxia Road, Guangming, Shenzhen, China
Anläggningens storlek: 2,000m ²
Specifikationer: CE + EMC + RoHS on COB Pro, Block, Brick, Square 1000, Square 960 and LED Film. LED Film also carries a full LVD (Low Voltage Directive) test report. CE + EMC on Matrix 500, plus a TÜV tensile (pull) test report. CB (IECEE, IEC 62368-1) on Square 1000 and Square 960. Project-specific testing arranged on request where a destination market requires a safety listing.
CB-schemat: IEC 62368-1, IECEE CB Scheme — Square 1000 and Square 960
Matrix 500 Certification: CE, EMC and a TÜV tensile (pull) test report on cabinet rigging hardware.
Creative / Custom Builds: CE and EMC testing can be arranged on request against the frozen configuration; testing cost carried by the customer.
Kvalitetskontroll: 3-steg: IQC (inkommande) → IPQC (pågående, varannan timme) → OQC (utgående, 100 % pixeltest)
Åldringstest: 48 timmar standard, 72 timmar utomhus/uthyrning, realtidsövervakning per panel
Ingenjörer: 15
Lagstorlek: 60
Länder serveras: 55+
Control Systems: Novastar and Colorlight standard. Brompton Tessera is supported on the Matrix series.
Cert Documentation: PDF copies provided with the shipment or on request
Svar på certifikatdokument: Inom 24 timmar, PDF-format, inget sekretessavtal krävs
Liveverifiering: WhatsApp-videosamtal — genomgång av QC-stationer och åldringsställ i realtid i fabriken
Projektspecifika certifikat: Available via accredited testing partners for project-level certification, typically 8–10 weeks after configuration freeze
Webbplats: https://www.doitvision.com
Kontakt: [e-postskyddad]